Products

G-ENERGY EXPERT L 5W-30

1 5 205

Description

PURPOSE AND DESCRIPTION

Semi-synthetic engine oil formulated with synthetic feedstock and improved additive composition to provide stable oil film and reliable wear protection under various operating conditions (including low temperature). Enhanced adaptive properties extend engine life.

This oil is recommended for use in gasoline and diesel engines (with turbocharger or not) in post-warranty cars, light trucks and vans where the API SL/CF (or earlier specifications) oils are required.

BENEFITS

  1. Wear debris removal and higher acid-neutralizing abilities prevent rapid oil oxidation and retain performance properties of the oil throughout its life (even when used in out-of-warranty cars).
  2. Enhanced cleaning and dispersant properties prevent deposits and lacquer formation, maintain system cleanness and maximize engine longevity.
  3. Good compatibility with seal materials retains seal elasticity and reduces the risk of oil leakage

G-ENERGY S SYNTH CF 10W-40

1 5 20 205

Description

PURPOSE AND DESCRIPTION

Semisynthetic motor oil formulated with a special combination of mineral and synthetic base components and specially selected additives. It delivers high performance. Recommended for year-round use. G-Energy S Synth CF 10W-40 is intended for all types of modern cars and light trucks diesel engines, including those with turbocharger.


BENEFITS

  1. Excellent lubrication characteristics provide a stable oil film on the engine components protecting from wear under various engine operation conditions.
  2. High thermal stability ensures engine reliability under severe operating conditions and allows longer intervals between oil changes.
  3. Increased neutralization capacity ensures improved anticorrosion and antioxidation properties.
  4. Superior dispersant properties reduce the thickening and aging due to soot.

G-ENERGY S SYNTH 10W-40

1 20 60 205

Description

PURPOSE AND DESCRIPTION

Semisynthetic motor oil formulated with a special combination of mineral and synthetic base components and specially selected additives. It delivers high performance. Recommended for year-round use. G-Energy S Synth 10W-40 is intended for all types of modern gasoline and diesel engines including the engines with turbocharger and catalytic converter system.

BENEFITS

  1. Provides easy start of the engine at low temperatures and optimum viscosity at high temperatures.
  2. Excellent lubrication characteristics provide a stable oil film on the engine components protecting from wear under various engine operation conditions.
  3. High thermal stability ensures engine reliability under severe operating conditions and allows longer intervals between oil changes.
  4. Good detergent and dispersion properties of the oil keep the engine clean and prevents build up of deposits.
  5. Protects the catalytic converter system, promoting its effective and long-term operation.

G-ENERGY F SYNTH EC 5W-30

1 5 20 205

Description

PURPOSE AND DESCRIPTION

Thanks to the synthetic base this product offers superior reliability in its performance and stability over time of its properties. It is suitable for use at low temperatures.

It is intended for the cars with gasoline and diesel engines, minibuses and off-road cars where an oil with energy-saving properties is required.


BENEFITS

  1. It provides high fuel efficiency due to the use of advanced friction modifiers.
  2. High detergency keeps the engine components clean.
  3. This product ensures reliable lubrication of friction points during extended operation at maximum speed and with heavy loads too long.
  4. High thermal stability delivers engine operation reliability and longer oil interval drains.
  5. Contributes to long-term and effective catalytic converter operation.
  6. It meets the standards of the leading world engines manufacturers concerning particularly oil consumption, energy-efficient properties and oil volatility.

G-ENERGY F SYNTH 0W-40

1 5 20 205

Description

This oil is formulated with high quality synthetic base oils and a specially selected hi-tech additive package. It ensures reliable engine operation and protection under any operating conditions, both on the highways and on the cities roads. It is especially suitable for extremely low temperatures.

It is intended for use in modern petrol and diesel engines (multi-valve, turbocharged and equipped with catalytic converter) of last generation cars, minibuses and utility trucks, which require top quality fuel economy oil.

BENEFITS

  1. It has energy-saving properties and reduces fuel consumption.
  2. High detergency keeps engine components clean.
  3. It retains its operational properties for a long time allowing longer intervals between oil changes.
  4. Instant lubrication of all friction points.

G-ENERGY FLUSHING OIL

4 205

Description

PURPOSE AND DESCRIPTION

Intended for flushing gasoline and diesel engines (without dissembling) at a scheduled time when the oil is changed and necessarily after the use of oil with poor performance characteristics, as well as when recommended oil change interval is exceeded.

Engines in LADA cars by AVTOVAZ.

To flush an engine warm it up for 20-30 min. of idle running, drain the old motor oil, fill the engine with the flushing oil and run it at idle for 15-25 min. Then discharge the flush oil, change the oil filter and fill the engine with fresh motor oil. 

BENEFITS

  1. Provides rapid and effective cleaning of various kinds of residues and contaminants
  2. Compatible with seal materials
  3. Protects engine compounds during flushing
  4. Has no effect on performance of a motor oil filled after

G-SPECIAL UTTO 10W-30

20

Description

Universal tractor transmission oil (UTTO) blended from mineral base oils and multi-purpose additive package exhibits excellent lubrication of hydraulic, brake and gear systems of agricultural vehicles subjected to severe operating conditions. 

It is designed for use in drive axle and hydro mechanical gearbox of agricultural and construction equipment produced by John Deer, Massey Ferguson, Ford-New Holland and other OEMs. The oil is also recommended for use in hydraulic systems of tractors, combines and farm machinery. It is ideally suited for oil-cooled disc brake systems.

G-SPECIAL TO-4 30

20

Description

Hydraulic and gear oil produced from mineral base oils and progressive additive system to provide lubrication in specialty vehicles and pit mining equipment. The state-of-the-art lubricant technology delivers outstanding wear resistance. The product features elastomer compatibility and meet the strictest requirements of Caterpillar TO-4.

The oil is designed for use in hydraulic and hydrostatic drive systems, powershift transmissions, hydro mechanical and manual gearboxes, final drives, main gears, and brake and steering systems, where Caterpillar TO-4 or Allison C4 specifications fluids are recommended.

G-SPECIAL TO-4 10W

20

Description

Hydraulic and gear oil produced from mineral base oils and progressive additive system to provide lubrication in specialty vehicles and pit mining equipment. The state-of-the-art lubricant technology delivers outstanding wear resistance. The product features elastomer compatibility and meet the strictest requirements of Caterpillar TO-4.

The oil is designed for use in hydraulic and hydrostatic drive systems, powershift transmissions, hydro mechanical and manual gearboxes, final drives, main gears, and brake and steering systems, where Caterpillar TO-4 or Allison C4 specifications fluids are recommended.

G-BOX CVT

1 205

Description

G-Box CVT
G-Box CVT is a synthetic service fluid specially designed for continuously variable transmission (CVT). Made of high quality base oils with special additive package.
Approvals/SpecificationsAudi/VW (TL 52180) 
Ford (CVT30/Mercon C) 
Daihatsu (Amix CVTF-DC/Amix CVTF DFE) 
Honda (HMMF & HFC-2) 
Toyota (TC), CVT FE
Nissan (NS-2 & NS-3) 
Mitsubishi (CVTF-Diaqueen J1/Diaqueen J-4/SP-III) 
Subaru (NS-2/Lineartronic CVTF) 
Mini Cooper (EZL 799) 
Hyundai Genuine CVTF
Hyundai/Kia (SP-III) 
Suzuki (TC/NS-2/CVT Green 1/CVTF Green 2) 
Dodge/Jeep (NS-2/CVTF+4) 
GM/Saturn (DEX-CVT) 
Ford (CVT23) 
Mercedes Benz (236.20)

Partners