Products

G-PROFI MSH 15W-40

4 205

Description

PURPOSE AND DESCRIPTION

High performance motor oil formulated with special set of base components and specially selected additives. It is intended for heavy duty diesel engines of trucks, buses and special vehicles, including the off-highway ones, of the leading European, US and Japanese manufacturers of equipment which are used under severe conditions at high temperatures.


BENEFITS

  1. Superior viscosity-temperature properties provide minimum oil viscosity loss during operation, reliable lubrication and engine components cooling in a wide range of loads and environmental temperatures.
  2. Excellent detergent and neutralization capacity of the oil throughout the operation promotes reliable soot handling.
  3. Very good wear protection prevents cylinders scuffing.
  4. Increased oil thermo-oxidative stability increases oil drain intervals.

G-PROFI GT LA 10W-40

20

Description

PURPOSE AND DESCRIPTION

Premium multi-purpose synthetic engine oil produced on the base of the latest low SAP technology. The oil is designed for modern heavy-duty diesel engines (Euro 6) with/without DPF, EGR, CRT, and SCR.

The oil is used to extend drain intervals in accordance with OEMs’ recommendations. It is developed to comply with the requirements of European OEMs’ such as Scania, MB, and MAN.

The product is recommended for Euro 6 (and earlier standards) diesel engines installed in buses, freight trucks, as well as off-road, construction and agricultural equipment operating under medium and heavy load conditions. The product is also recommended for use in CNG engines.

G-PROFI GT LA 10W-40 is also suitable for use in diesel engines installed in European, U.S. and Asian equipment requiring the use of API CI-4 or ACEA E6/E7/E9 oils. It is recommended for use in CNG engines.


BENEFITS

  1. Long Life oil approved by MB, MAN, Volvo and other OEMs.
  2. Base oils featuring high thermal stability along with progressive additives prevent high-temperature deposits formation, keep the system clean and increase engine reliability.
  3. Suitable for both diesel and CNG engines.
  4. Guarantees engine start and rapid lubrication at low temperatures.
  5. Low SAP formula protects emission control systems and ensures their effective operation.
  6. Highly efficient anti-wear additives protect engine against wear and prevent bore polishing.

G-PROFI MSJ 15W-40

20 205 1000

Description

PURPOSE AND DESCRIPTION

Semi-synthetic G-Profi MSJ 10W-30 oil designed to protect high-powered diesel engines of buses, heavy construction and specialty vehicles up to Euro 5 emission control standards. The oil is suitable for engines both with and without diesel particulate filters (DPF). It is intended for most engines with exhaust gas recirculation (EGR) or selective catalytic reduction (SCR) systems.


BENEFITS

Extended drain interval 
Long life oil approved by MB, MAN and Volvo among others. 
 Energy saving properties 
Ensures 3.3% fuel economy compared to SAE 15W-40 (API CJ-4) oils (proved by EPA SmartWay™ 
testing). 
 Versatility 
Suitable for modern diesel and gasoline engines, as well as engines using compressed natural gas 
(CNG) or liquefied petroleum gas (LPG). 
 Low-temperature characteristics 
Ensures easy low temperature start of engine and rapid lubrication. 
 Low SAPS 
Low content of sulphur, sulphated ash and phosphorus allows for reliable protection of emission 
control systems and their efficient trouble-free operation. 
 High wear protection 
Contains 
  1. Extended drain interval. Long life oil approved by MB, MAN and Volvo among others. 
  2. Energy saving properties. Ensures 3.3% fuel economy compared to SAE 15W-40 (API CJ-4) oils (proved by EPA SmartWay™ testing). 
  3. Versatility. Suitable for modern diesel and gasoline engines, as well as engines using compressed natural gas (CNG) or liquefied petroleum gas (LPG). 
  4. Low-temperature characteristics. Ensures easy low temperature start of engine and rapid lubrication. 
  5. Low SAPS. Low content of sulphur, sulphated ash and phosphorus allows for reliable protection of emission control systems and their efficient trouble-free operation. 
  6. High wear protection. Contains effective anti-wear additives that make the wear protection properties of the oil similar to that of SAE 15W-40 and API CJ-4 oils. 

G-ENERGY ANTIFREEZE SI-OAT

1

Description

G-ENERGY ANTIFREEZE HD

10

Description

PURPOSE AND DESCRIPTION

G-Energy Antifreeze HD is designed for use in cooling systems of heavy-duty internal combustion engines, including those made of cast iron, aluminum, and alloys; cooling systems containing aluminum and copper alloys, where high-temperature aluminum protection is needed. The product is suitable for use in gasoline, diesel, and gas engines of vehicles and stationary equipment. 

G-Energy Antifreeze HD is used in Caterpillar, Cummins, Detroit Diesel, John Deer, Case New Holland, Navistar, Freightliner and other engines in accordance with OEMs’ recommendations.

BENEFITS

  1. Excellent corrosion resistance – progressive additive system
  2. Superior cavitation protection – for wet cylinder liners
  3. Aluminum and alloy protection – highly efficient inhibitors
  4. Smooth uniform protective film – low silicate additives
  5. Residues and varnish prevention – silicate stabilizing agent
  6. Sludge and deposits prevention – phosphate free additive composition

G-ENERGY ANTIFREEZE ANTIFREEZE

1 220

Description

PURPOSE AND DESCRIPTION

Gazpromneft Antifreeze is designed for internal combustion engine cooling systems. Carboxylic acid based additives ensure reliable and prolonged protection from corrosion, foaming and rubber swelling. 
Gazpromneft Antifreeze delivers long-term protection against frost and corrosion. It is suitable for all-season application in all type liquid-cooled engines.

The coolant life is up to two years (100.000 km). G-Energy Antifreeze is recommended for use in vehicles where, for some reasons, the coolant is changed rather often.

BENEFITS

  1. Enhanced heat transfer – optimum engine operating temperature
  2. Reduced downtime – thermostat, heat radiator and water pump
  3. Reliability – excellent corrosion inhibition
  4. Hard water stability – no silicates or phosphates
  5. Mixed vehicle fleet convenience – one coolant for both cars and trucks
  6. Sustainability – carboxylic acids used for the additive system do not have a negative impact on the environment.

G-ENERGY ANTIFREEZE NF

1 220

Description

PURPOSE AND DESCRIPTION

Ethylene glycol coolant designed to protect engine and cooling system against frost, overheating, corrosion and cavitation. The coolant is valid for three years, or in accordance with recommendations of automotive OEMs.

It delivers long-term protection against frost and corrosion; it is recommended for use in engines containing cast iron or aluminum part, as well as in aluminum cooling systems.

BENEFITS

  1. Extends service life – through synergetic additive composition
  2. Reduces downtime – thermostat, heat radiator and water pump  
  3. Reliability – excellent corrosion inhibition
  4. Hard water stability – no silicates or phosphates
  5. Mixed vehicle fleet convenience – one coolant for both cars and trucks

G-ENERGY ANTIFREEZE SNF

1 220

Description

PURPOSE AND DESCRIPTION

G-Energy Antifreeze SNF, antifreeze coolant concentrate, is diluted with water to prepare ready-to-use coolant. The concentrate is not ready for use. The diluted coolant is suitable for use in cooling systems of internal combustion engines. (Manufactured acc. to TU 2422-001-13331543-2004.)

Formulated with ethylene glycol G-Energy Antifreeze SNF protects cooling system and engine from frost, overheating, corrosion and cavitation. 

BENEFITS

  1. Extends service life – through synergetic additive composition
  2. Enhances heat transfer – optimum operating temperature
  3. Reduces downtime – thermostat, heat radiator and water pump 
  4. Reliability – excellent corrosion inhibition
  5. Hard water stability – no silicates or phosphates
  6. Saves time and money – does not require additional maintenance while in operation
  7. Mixed vehicle fleet convenience – one coolant for both cars and trucks
  8. Sustainability – carboxylic acids used for the additive system do not have a negative impact on the environment

G-ENERGY EXPERT DOT-4

455 220

Description

PURPOSE AND DESCRIPTION

G-Energy Expert DOT-4 high quality brake fluid to the brake system and clutch cars of domestic and import production, where the recommended fluid standard DOT-4.
G-Energy Expert DOT-4 operable at the temperature from minus 50 C to plus 50º C. Use in accordance with the instructions of the manufacturers.

G-ENERGY GREASE L MOLY EP 2

400

Description

PURPOSE AND DESCRIPTION

Lithium soap based automotive grease containing molybdenum disulphide and progressive anti-welding additives, is designed to lubricate CVJs and other high-load parts of light and heavy vehicles. This multi-purpose grease is used in:

  • constant velocity joints;
  • cardan joints;
  • axle pivot bolsters.

BENEFITS

  1. Molybdenum disulphide and EP additives help withstand extreme loads and severe operating conditions.
  2. Molybdenum disulphide delivers reliable protection in case of highly contaminated operating environment or lack of grease.
  3. Superior protection against seizure and wear.
  4. Prolonged equipment life in a wide operating temperature range, from –30°C to +120°C, with short rise to +150°C.
  5. Excellent resistance to the action of water: rust and cavitation prevention.

Partners